Puff-Lon is a lubricating ballistic filler that eliminates the air space inside an ammunition cartridge and smooths the barrel with its all-natural dry lubricants. During all these years our customer reports have been positive with no unpredicted mishaps.
The ingredients in Puff-Lon are as follows: made with dry, light weight powdered synthetic lubricants and molybdenum disulfide impregnated into a light weight 100% natural cellulose (about 1/10th the weight of water, 1cc = about 15gr. of gunpowder in volume) that is able to withstand temperature in excess of 650 degrees Fahrenheit that is compressible, and resilient. Resiliency is very important to be sure that a compressed load is always maintained and the position of the powder will not change. The combination of dry lubricants slide together without sticking together to create a better coefficient of friction that any one lubricant alone. The lubricants, which are made of particles as small as .1 um and have the capability of traveling with the gases. The product has been granulated so it can be handled with the same ease as your gunpowder and has an infinite shelve life. The lubricants have been formulated to avoid excessive build-up in the barrel, while leaving a moisture resistant one layer coating that is smoother than any known dry surface. The only build-up of lubricant in the barrel are in the micro voids left by imperfect
machining and polishing of the barrel or in the pits of old eroded and corroded barrels. The lubricants fill in the low points and voids where
the projectile never touch, this is where the copper and lead fouling would normally start the building process by shaving off the fouling and
stuffing it into these cavities. We recommend cleaning the barrel as little as possible but always oil your barrel before stowing it away. This will
give you less settling-in shots the next time you shoot.